The ProSYS™ security system supports a variety of keypads including the Touchscreen and LCD keypads which can be used with or without proximity key readers which further increase the ease of operation of the system. Low profile touchscreen keypads with proximity available in black or white Intuitive menu-driven user interface Proximity Key Readers for easy arm/disarm operation Program Transfer Module for program backup and copying to other systems

• Low profile touchscreen keypads with proximity available in black or white
• Intuitive menu-driven user interface
• Proximity Key Readers for easy arm/disarm operation
• Program Transfer Module for program backup and copying

Features

• Flush, wall or ceiling mount
• Provides reliable perimeter glass break detection
• Detects breakage of all glass types: plate, tempered, laminated and wired
• Microprocessor-based Dual Frequency Pattern Recognition
• 9 m (30 ’) range with omni-directional microphone
• Dead microphone supervision
• Remote test without opening unit
• Test using ViTRON™ Tester
• Model names:
• RG71FMG3 ViTRON™ Plus Glassbreak Detector
• RG65 Tester for ViTRON™
• RA66 ViTRON™ Swivel

Approvals

SHOCKTEC™ PLUS DIGITAL SHOCK DETECTORS 

ShockTec™ Plus is a digital shock detector with a door/window magnetic contact for internal use that provides reliable 24-hour perimeter protection. A break-in is detected as soon as the

intruder attempts to force, smash, drill or even saw through the protected window, door, wall or roof.

ShockTec™ employs an advanced digital microprocessor to analyze the vibration signal received from the electric sensor.

A unique feature of ShockTec™ Plus is digital sampling of the signal simultaneously in two separate channels, each channel amplified at a different gain. This provides an extremely wide dynamic range of the sampled signal, enabling precise measurement and analysis of the shock signal.

The ShockTec™ Plus model has a magnetic reed switch for double protection of shock plus opening of windows or doors, connected to two separate zones in the panel. Any attempt to defeat the detector by using large magnets, as defined by EN-50131-2-6 Security Grade 2 requirements, will cause a tamper.

Features

• Digital Microprocessor with Intelligent Digital Signal Processing
• Gross Attack detection
• Incorporates a door/window magnetic contact for shock and contact protection (separate zones)
• Attempts to defeat the contact with large magnets cause a tamper alarm
• Intelligent Digital Signal processing – differentiates between naturally caused vibrations and cuts out frequencies that cannot be caused by an illegal entry attempt
• Ideal for windows, doors, walls and roofs
• Encapsulated bi-morph piezo electric sensor
• Model name: RK601SM Shocktec™ Plus with Contact

Approvals

Technical Specifications

• Supply voltage: 9V-16V DC
• Current consumption (typical): 7.5mA
• Operational temperature: -20°C to 60°C
• Maximum humidity: 95% non-condensing
• Sensitivity setting: Dual stage potentiometer
• Tri-color LED indicator: Orange-over-sensitive, green: alarm & correct calibration, red: under-sensitive
• Contact ratings:
• Alarm relay: 100mA at 24VDC, NC, Optorelay
• Tamper relay: 500mA at 24VDC, NC
• Reed relay: 100mA at 24 VDC, NC
• Alarm Time: 2.5 seconds
• Latching modes: Any or first to latch operation modes
• Max No. of units on Any Latch loop: 80
• Max No of units on 1st to Latch loop: 10
• False alarm protection: Digital microprocessor signal processing and noise reduction with maximum ground plane
• Electrostatic discharge: No false alarms up to 8kV
• RF immunity: 40 V/m from 80MHz to 1GHz
• Enclosure material: Flame retardant ABS
• Enclosure dimensions: 25x28x95mm for the detector, 10x12x58mm for the magnet

RISCO SEISMIC DETECTOR 

RISCO Group’s high security Seismic Detector is your ultimate choice for 24/7 protection of vaults, safes, ATMs, reinforced concrete walls and strong rooms, steel armored cabinets, vending machines and doors. Powered by RISCO Group’s advanced technologies, the seismic detector monitors the vibration and temperature of the protected surface and will detect all known types of intruder attacks, such as sledge hammers, diamond head drills, explosives, hydraulic pressure tools and thermal tools.

The RISCO Seismic Detector is extremely simple to install and can be installed on the RISCO Bus allowing unique remote parameter setting and diagnostic capabilities - or as a regular relay detector with built-in EOL resistors.

Popular accessories such as a metal mounting plate, test generator and anti-drilling shield are included as standard with the detector.

Features

• Piezo sensor with pattern recognition digital signal processing
• Temperature sensors detect extreme cold and high temperature attacks
• Detection range up to 5m (16’) radius
• Anti-drilling shield as standard
• Remote sensitivity reduction input, allows reducing sensitivity during ATM or vending machine dispensing
• Wall and cover tamper protection
• Relay or RISCO Bus installation
• RK66S Seismic Detector, includes mounting plate, test generator, anti-drilling shield and heavy duty installation bolts

Approvals

Technical Specifications

• Detection coverage: Up to 5m (16.5'’) radius
• Adjustable vibration sensitivity: 8 levels by dip switch
• Adjustable vibration signal duration: 4 levels by dip switch
• Explosion and sledge hammer detection: Dip switch selectable
• Vibration generation: External or internal test generator
• Sensitivity indication: Bar graph LEDs
• Self test indications: Power, low-voltage, logger memory, piezo sensor, temperature sensor
• RISCO Bus: Remote parameter setting an diagnostics via RISCO Group security system keypads and PC remote software
• EOL resistors: Built-in, jumper selectable
• Operating voltage: 9 to 16V DC
• Current consumption: Typically 20mA @ 12V DC
• Alarm contacts: 24 VDC, O.1A, Form C changeover relay
• Tamper contacts: 24 VDC, 0.1A
• Alarm contact hold time: 2.5 seconds
• Analog signal output: For signal analysis and calibration
• Remote test input
• Sensitivity reduction input
• RISCO Bus: RS485
• Operating temperature: -40°C to +70°C (-40°F to 158°F)
• Storage temperature: -50°C to +70°C (-58° to 158°F)
• Ingress protection rating: IP43
• Impatc rating: IK08
• RFI immunity: According to EN50130-4
• Dimensions (L x H x W): 102 x 27.5 x 80.2 mm (4.0” x 1.1” x 3.2”)
• Weight: 220 g (7.7oz)